Product Description
Isoria© Rubber Lined Standard Butterfly Valves 1½” to 24” (150 psi to 240 psi)
- Centered‐disc butterfly valve, sealed by elastomer liner (EPDM or Nitrile)
- Available with Lever, Manual gearbox, Pneumatic or Electric actuator
- Wafer‐type body (T1), semi‐lug body (T2), full‐lug body (T4) or U‐section body with flat faces (T5).
- Body types T2, T4 and T5 are suitable for downstream dismantling and dead‐end service. Valve disc made of nodular cast iron or stainless steel.
- Connections to EN, ASME or JIS.
- Applications: Engineering contractors. General water circuits, heating oil, oil. Shut‐off and
control duties in water management for water supply, water treatment,
drainage and irrigation.
Isoria© Rubber Lined Special Design Butterfly Valves 1½”-40” (150 psi to 375 psi)
- Centered‐disc butterfly valve, sealed by elastomer liner (EPDM, Nitrile, Hypalon, Viton, Epichlorhydrin, High-temperature silicone, HNBR, Polybutadiene)
- Available with Lever, Manual gearbox, Pneumatic or Electric actuator
- Wafer‐type body (T1), semi‐lug body (T2), full‐lug body (T4) or U‐section body with flat faces (T5).
- Body types T2, T4 and T5 are suitable for downstream dismantling and dead‐end service. Valve disc made of nodular cast iron or stainless steel.
- Connections to EN, ASME or JIS.
- Applications: Engineering contractors. General water circuits, heating oil, oil. Shut‐off and control duties in water management for water supply, water treatment, drainage and irrigation.
Isoria© and Mammouth© are copyright of KSB Aktiengesellschaft, Johann-Klein-Straße 9, 67227 Frankenthal (Germany) www.ksb.com
